nipple shaker or tray

made this for wheel builds. toss nipples in, shake. now all your nipples are lined up. i use a straight pick to stab the nipples and start em on the spoke.

campagnolo chainring bolts

campy chain ring bolts are tough to remove once they are corroded. the t30 side of the bolt has a lot of surface area for corrosion. the best way i have found to remove these is the clamp a t30 torx in the vise and use an impact screwdriver. set the crank on the t30 wrench and use the impact screwdriver with the biggest flat bit you got. should free it up. i have used an impact gun on the t30 side but it can strip out. the t30 on the crank arm gets the impact gun or normal wrench. i use a pick to pick out the anti tampering plug

crank puller

tired of cranking hard on the crank puller? crank seems seized on? use the crank puller as usual, when you build up a lot of pressure and tension give the crank puller a good hit with the hammer. should loosen the crank right up

drywall screw

another trick for pulling out jammed ferules in shimano road levers. brake ferules inside a shimano road lever is a no no. if one is stuck then grab a drywall screw to pull it out.